Published in： 2021-01-22 14:02:20, published via： cyanbat | clicks: 0 | Information Sources：
@cyanbat
The radiator has high thermal efficiency, which can reduce the transfer amount of heat medium water and reduce the energy consumption of transfer. Therefore, the energy-saving effect of European-style aluminum radiator is very significant. The introduction of the bimetallic radiator UR7002 is called steel-aluminum composite. Due to the bending of the double water channel, the metal mold is difficult to pull the core, so the alloy steel pipe core is used, which is required by the process, not for internal corrosion protection. In order to be suitable for different water quality in our country, considering internal anti-corrosion, introducing international technology, combining China's actual heating environment and heating water quality, reasonable structure, light weight and energy saving.
Die-cast aluminum radiator manufacturer Jeonnam aluminum radiator processing plant
It is required that only supplementary water is required during the running period. It is recommended that the internal water of the heating system be softened to add preservatives to prevent the heating system and radiator from corroding the heating system and radiators by oxygen generated after the water is heated. Heating radiator full water maintenance: The internal water of the heating system cannot be discharged after the heating is turned off. It is forbidden to replace the original water in the heating system. It needs to be filled with water during the non-heating season. Maintain the radiator. If there is any suggestion to replace it, only partial Partial discharge maintenance! After the system is short of water, fill it with water for maintenance. The radiator paint surface protection: the radiator is sprayed with plastic, and no bumps are allowed. If the paint surface is touched, it is recommended to use sandpaper to remove rust and spray with self-painting protection, especially when it is wet. Pay more attention to local areas to prevent long-term condensation or water contact on the surface of the radiator. It is recommended that the appearance and interface inspection should be performed once a month before heating.